manualshive.com logo in svg

Panasonic KX-TG1070FX, Operating Instructions Manual, Page: 6 / 24

Share
Download
Panasonic KX-TG1070FX Operating Instructions Manual Download Page 6

6

Preparation

Connections

Base unit

1. To telephone network
2. 220-240 V, 50 Hz

Note:

•

Use only the included AC adaptor and
telephone line cord.

•

Connect the AC adaptor securely to
the AC outlet.

•

To mount the base unit to the wall, see
page 23.

Charger

KX-TG1072

Battery installation

Important:

•

Wipe the battery ends (+,–) with a dry
cloth.

•

Install the batteries without touching
the battery ends (+,–) or the unit
contacts.

1

Press the notch of the handset cover
firmly and slide it in the direction of the
arrow.

2

Insert the batteries negative (–)
terminal first. Close the handset cover.

Note:

•

Use only the included rechargeable
batteries.

Hook

1

1. 220-240 V, 50 Hz

Note:

•

Never install telephone wiring during a
lightning storm.

•

Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.

Location

For maximum distance and noise-free
operation, place your base unit:
•

Away from electrical appliances such
as TVs, radios, personal computers
or other phones.

•

In a convenient, high and central
location.

Summary of Contents for KX-TG1070FX

























Reviews:

No comments