manualshive.com logo in svg

Panasonic KX-TG1070FX, Operating Instructions Manual, Page: 3 / 24

Share
Download
Panasonic KX-TG1070FX Operating Instructions Manual Download Page 3

3

Introduction

Included accessories

Accessory items

AC adaptor for base unit
Part No. PQWATG1070CE

Telephone line cord

Rechargeable batteries
AAA (R03) size
Part No. HHR-55AAAB or
HHR-4EPT

Handset cover*

Charger
Part No. PQWETGA107CE

KX-TG1070
KX-TG1090

KX-TG1072

Quantity

No.

1.

2.

3.

4.

5.

* The handset cover comes attached to the handset.

1.

    2.

     3.

4.

                5.

1                                            1

1                                            1

2                                            4

1                                            2

_                                            1

Note:

•

When replacing the batteries, use only 2 rechargeable AAA (R03) size nickel metal
hydride (Ni-MH) batteries of capacity up to 750 mAh. We recommend using
Panasonic rechargeable batteries (Model No. P03P).

•

We cannot be responsible for any damage to the unit or degradation of performance
which may occur from using non-Panasonic rechargeable batteries.

Summary of Contents for KX-TG1070FX

























Reviews:

No comments