11.1.2. Control Section
1) AC-DC Inverter Function
The AC input voltage is rectified and smoothed by D10-13 and C5. The obtained DC voltage is converted into a rectangular wave
by the switching transistor Q1, then isolated and transduced by T1. This converted rectangular wave is rectified and smoothed by
D101 and C101 to output DC27V. The DC27V is transmitted to the primary side by PC1 and then PWM- controlled to keep
constant. The switching frequency of Q1 is approximately 100KHz (70KHz~160KHz).
2) DC-DC Inverter Function
The DC27V as input is converted into a rectangular wave by the switching transistor Q201, then isolated and transduced by T2.
DC+15V, -15V and 3.3V are outputted by a rectification smoothing circuit composed of D401, D301, D701, C401, C301 and C702.
The +3.3V of the three outputs is PWM-controlled by IC201 to keep constant.The switching frequency of the Q2 is approx. 55 KHz.
3) Ringing signal output function
Ringing signal (20/25Hz, 75Vac from main board) is amplified in power by power amplifier circuits (including of IC501, R601~R608,
C601~C603).
Ringing signal amplified in power is transmitted to the ringing transformer through pin 4 of CN601.
4) AC Power Failure Detection
AC power failure is detected by D31~D32, R33~R41, C31, PC31.
When AC power is on, PC31 is on.
When AC power is turned off, PC31 is off.
5) Battery back up function
This back up battery adaptor circuit has DC supply function, from battery (+24V) to service unit and DC charge from service unit
to battery (+24V). Charge current is typ. 0.4A.
22
KX-TES824LA / KX-TEM824LA /
Summary of Contents for KX-TES824LA
