manualshive.com logo in svg

Panasonic KX-TEM824, Features Manual

The Panasonic KX-TEM824 is a reliable and advanced telephone system for small businesses. It allows seamless communication with user-friendly features. To get the most out of your device, download the free user manual from our website. Explore its extensive functionalities effortlessly – just a click away!

Share
Download
background image

1.15 Optional Device Features

Feature Guide

111

DISA Busy Mode

If the destination of a DISA call is busy, the call will be redirected to an idle extension (

 Hunting Group Set 

[100]) in the destination's idle extension hunting group (

 1.2.1 Idle Extension Hunting). If no extension in 

the group is available, or if the destination of the DISA call is not a member of an idle extension hunting 
group, the call will be handled in one of the following ways, according to system programming (

 DISA Busy 

Mode [506]):

a)

Disconnect

: The caller hears a busy tone and the call is disconnected.

b)

Call Waiting

: The called extension hears a call waiting tone if the extension has set Call Waiting.

c)

DISA

: The following procedure is performed:

1)

If the assigned DISA OGM (busy message) has been recorded, the caller hears the DISA 
OGM (e.g., "The party you called is unavailable..."). If the assigned DISA OGM has not been 
recorded, the caller hears a busy tone and the call is disconnected.

2)

After the busy message has been played, the DISA OGM that was sent before the busy 
message is sent to the caller again.

3)

The PBX waits for the caller to enter a new destination. In this case, the PBX does not accept 
any Outside (CO) Line Access number regardless of the security type.

If the destination is a member of a DISA ring group, DISA Busy Mode will not function for the call. The PBX 
regards it as unanswered.

DISA Intercept Mode

If the destination of a DISA call does not answer the call within a preprogrammed time period (

 DISA Ring 

Time before Intercept [508]), the call will be handled in one of the following ways, according to system 
programming (

 DISA Intercept Mode [507]):

a)

Disconnect

: The call is disconnected. 

b)

Intercept

: The call is redirected to preprogrammed intercept destinations in the following priority: 

DISA IRNA to BV—Day/Night/Lunch [438-440] 

 Flexible Ringing—Day/Night/Lunch [408-410] 

This is useful for business calls. For example, the call can be forwarded to the operator, a Voice 
Processing System (VPS) or Built-in Voice Message (BV) automatically.

DISA No Dial Mode

If the PBX does not receive either DTMF (Dual Tone Multi-Frequency) signals or a fax (CNG) tone within a 
preprogrammed time period (

 DISA Wait Time after OGM [505]), or if the PBX does not receive DTMF 

signals within a preprogrammed time period (

 Intercept Time for Internal DISA [515]), the call will be 

handled in one of the following ways, according to system programming (

 DISA No Dial Mode [510]): 

a)

Disconnect

: The call is disconnected.

b)

Intercept

: The call is redirected to preprogrammed intercept destinations in the following priority: 

DISA IRNA to BV—Day/Night/Lunch [438-440] 

 Flexible Ringing—Day/Night/Lunch [408-410]

DISA Security Mode

Security can be enabled for the PBX to control the types of calls that can be made by callers using DISA. 
When the DISA security mode is set to "All Security" or "Trunk Security" (

 DISA Security Mode [511]), a 

caller is required to enter a DISA security code (

 DISA Security Code [512]) before making intercom and 

outside (CO) line calls, or outside (CO) line calls only, respectively. The DISA security code and the number 
of digits required for the DISA security code (

 DISA Security Code Digits [530]) can be assigned by the 

manager. After entering a DISA security code, if the code is the same as one of the preprogrammed security 
codes, the caller will hear a short beep. It is possible to eliminate the tone through system programming (

 

DISA Tone after Security Code [518]).
If the DISA security code is entered incorrectly 3 times when using DISA, a reorder tone will be sent to the 
caller and the call will be disconnected.

Summary of Contents for KX-TEM824











































































































































































































































































































Reviews:

No comments

Related manuals for KX-TEM824

DAC Limited 711 Series User Manual preview
711 Series
Brand: DAC Limited Pages: 12
Karel MS48IP Technical Reference And Installation Manual preview
MS48IP
Brand: Karel Pages: 56
Karel MS26S Easy To Use Owner'S Manual preview
MS26S
Brand: Karel Pages: 55
Makita JV001GZ Instruction Manual preview
JV001GZ
Brand: Makita Pages: 84
Jabra CRUISER2 HSF002 Datasheet preview
CRUISER2 HSF002
Brand: Jabra Pages: 2
Walton Primo HM3+ User Manual preview
Primo HM3+
Brand: Walton Pages: 16
BT FREESTYLE 80 PLUS User Manual preview
FREESTYLE 80 PLUS
Brand: BT Pages: 34
BT DIVERSE User Manual preview
DIVERSE
Brand: BT Pages: 25
GE 2-8111AH User Manual preview
2-8111AH
Brand: GE Pages: 84
Talkswitch owner friendly Specifications Manual preview
owner friendly
Brand: Talkswitch Pages: 22
AT&T E5965C Quick Start Manual preview
E5965C
Brand: AT&T Pages: 4
Radio Shack 43-324 User Manual preview
43-324
Brand: Radio Shack Pages: 44
Telular PHONECELL SX3e AMPS User Manual preview
PHONECELL SX3e AMPS
Brand: Telular Pages: 26
Geemarc Photophone 110 Manual preview
Photophone 110
Brand: Geemarc Pages: 48
GE 2-9896 Use & Care Manual preview
2-9896
Brand: GE Pages: 16
GE 21009GE3 User Manual preview
21009GE3
Brand: GE Pages: 2
GE 2-9710 Use And Care Manual preview
2-9710
Brand: GE Pages: 26
GE 2-9720 Use And Care Manual preview
2-9720
Brand: GE Pages: 16

Brands by name

Popular brands

Load more brands