Panasonic KX-TDE200, Installation Manual

Page: 55 / 204

Note
•
For details about frame earth connection, refer to "3.2.5 Frame Earth Connection".
•
For details about backup batteries connection, refer to "3.2.6 Backup Battery Connection".
The following procedures are for installing or replacing a PSU only. Do not replace or remove the PSU
for any other purpose.
Installing the Power Supply Unit
1.
Insert the PSU along the guide rails.
CAUTION
For safety reasons, do not touch parts in the PSU.
Guide Rail
2.
Push the release lever in the direction of the arrow, so that the PSU engages securely with the connector
on the back board.
Release Lever
Back Board
Installation Manual 55
3.2.4 Installing/Replacing the Power Supply Unit