Panasonic KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008..., Operating Manual

Page: 76 / 212

1.3 Telephone Features and Operation
76 Operating Manual
To set the timer for "No Answer" and "Busy/No Answer"
Call Forwarding (FWD) for your Incoming Call Distribution Group
• The FWD/DND button light shows the current status as follows:
Off : Both features are not set.
Flashing red slowly : FWD mode
Red on : DND mode
• The Group FWD button light shows the current status as follows:
Off : No set
Flashing red slowly : FWD mode
Off-hook. Enter time
( seconds [2 digits]).
time
PT/SLT/PS
Enter 713 . On-hook.
1 3 7
C.Tone
PT/SLT/PS
0
1
Set
Cancel
OR
Enter 1 to set
or 0 to cancel.
Enter ICD Group
extension number .
ICD Group
extension no.
Off-hook.
5
6
4
Both Calls
Intercom Calls
Outside Calls
OR
OR
Enter 71 .
1 7
Enter 4 to 6 as
you desire.
Enter # . On-hook. Enter destination extension number .
Or enter CO line access number
and then outside phone number .
OR
destination
extension no.
(Max. 32 digits)
outside
phone no.
CO line
access no.
C.Tone
ICD Group: Incoming Call Distribution Group
For "Cancel", go on-hook
directly after entering ICD
Group extension number.