Panasonic KX-TDA150 Installation Manual Download Page 96

Page: 96 / 158

2.5.3 DLC16 Card (KX-TDA0172)

Function

16-port digital extension card for DPTs, DSS consoles, and PT-interface CSs.

LED

Amphenol

To extensions

Accessories and User-supplied Items

Accessories (included):

Screws

2, Ferrite core

User-supplied (not included):

Amphenol connector

Note

•

Attach the included ferrite core to the cable. Refer to "2.2.8 Attaching a Ferrite Core".

•

To connect the Amphenol connector, refer to "2.2.9 Fastening Amphenol Connector".

•

To use a DLC16 card with DSS consoles or Voice Processing System (VPS), the Local Processor
(LPR) software of the card must be version 7.000 or later.

Installation Manual

2.5.3 DLC16 Card (KX-TDA0172)

Summary of Contents for KX-TDA150































































































































































Search results

Summary of Contents for KX-TDA150

Reviews:

Related manuals for KX-TDA150

Brands by name

Popular brands

Panasonic KX-TDA150, Installation Manual

Search results

Summary of Contents for KX-TDA150

Reviews:

Related manuals for KX-TDA150

Brands by name

Popular brands