2.3 Maintenance
Programming Guide
43
2.3.2
Maintenance Settings
1.
Click
2.2 Maintenance Settings
in the main menu.
2.
Assign each parameter referring to the descriptions below.
At any time during the session, you can:
•
Click
ALL CLEAR
to return all parameters to their previous values.
•
Click
MENU
to return to the main menu (see "2.1 Main Menu for the Administrator").
•
Click
LOGOUT
to log out from the IP-GW16 Maintenance Utility (see "2.5.2 Log Out").
3.
Click
OK
.
You will see a confirmation screen.
Note
If your entry contains an invalid value, you will be prompted to correct your input. Enter
correct values for the parameters shown in red and try again.
4.
Confirm your entry and click
OK
.
To return to the previous screen, click
CANCEL
.
Parameter Descriptions
The parameters indicated with "
*
" must be changed while the VoIP Gateway Card is in the "STOP" status (see
"2.3.1 Status Control"). The changes do not have to be followed by a reboot to become effective.
Username/Password Settings
Parameter & Description
Default
Value Range
Username for Administrator
Administrator-level log-in user name.
Administrator
Max. 16 characters
