4.3
System Programming
Expansion Unit Type
(contd.)
56
109
7.
Press STORE.
If only one system is in operation, go to step 8.
8.
Press NEXT to program the Slave System.
Display example: Slave: C; E1; E2
9.
Repeat steps 3 through 7.
10.
Press END.
Conditions
• There are two expansion areas in KX-TD816, areas 1 and 2 from
bottom to top. One 8-Station Line Unit and either one 4-CO Line Unit
or 2-ISDN S0 Line Unit can be installed.
• There are three expansion areas in each system for KX-TD1232, areas
1, 2 and 3 from bottom to top. Up to two 8-Station Line Units and
either one 4-CO Line Unit or 2-ISDN S0 Line Unit can be installed in
each system.
• In case of starting the system for the first time or System Data Clear, the
application for location will adapt the practical installation instead of
system default setting.
• If the Slave System is out-of-service of KX-TD1232, skip steps 8 and 9.
• After changing the setting, unplug the system once and plug it in again.
Otherwise, the previous setting will remain.
Feature References
Section 3, Features,
Module Expansion
