manualshive.com logo in svg

Panasonic KX-TD7690C, Operating Instructions Manual

Share
Download
Panasonic KX-TD7690C Operating Instructions Manual Download Page 43

43

Battery Information

After your Panasonic battery is fully charged [at 25 °C (77 °F)]:

• Battery charge may be shortened depending on usage conditions and ambient 

temperature.

• The battery cannot be overcharged.
• The battery will drain even while the unit is "OFF".

• The PS can receive calls while charging.

• Battery consumption increases when the PS is used out of range.  If  "

"  flashes, power 

off the PS.

Low Battery Warning

The battery needs to be charged in the following situations:
– "

" flashes or the alarm sounds every five seconds*.

–

  

When

 

"

CHARGE BATTERY

"

 

is displayed, charge your PS for 6 hours.  When "

CHARGE 

BATTERY

"

 

is displayed, the PS cannot be operated.

* If the low battery warning occurs during a conversation, you can have the conversation for 

another minute, and then the call will be disconnected automatically.

Replacing the Batteries

If "

" flashes after a few telephone calls even when the batteries have been fully 

charged, it is time to replace the batteries with new ones.
Before replacing the batteries, turn the power off to prevent memory loss.  Make sure you 
charge the new batteries for about 6 hours in order to display the battery strength prompt 
correctly.
• Please order Panasonic battery with service part No. N4HUGLB00001 to replace.

Operation

While in use (Talk)

While not in use (Stand-by)

Approx. battery charge

Up to about 8 hours

Up to about 120 hours

Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type of battery recommended by the 
manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
The product that you have purchased contains a rechargeable battery.  The battery is 
recyclable.  At the end of its useful life, under various state and local laws, it may be 
illegal to dispose of this battery into the municipal waste stream.  Check with your local 
solid waste officials for details in your area for recycling options or proper disposal.

CAUTION:

The lithium ion/polymer battery you have purchased is recyclable.
Please call 1-800-8-BATTERY for information on how to recycle this battery. 

Important Information

Summary of Contents for KX-TD7690C

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands