Panasonic KX-TD7685 - Wireless Digital Phone Operating Instructions Manual Download Page 67 | Manualshive

Page: 67 / 76

background image

Battery Information

After your Panasonic battery is fully charged (at 25 °C [77 °F]):

Operation

Operating Time

While in use (Talk)

Up to about 10 h

While not in use (Standby)

Up to about 168 h

•

Operating time may be shorter than listed above depending on usage conditions and
ambient temperature.

•

The battery will drain slowly even while the handset is turned off.

•

The handset can receive calls while charging.

•

Battery consumption increases when the handset is used out of range. If “ ” flashes,
power off the handset.

Low Battery Warning

The battery needs to be charged in the following situations:
•

“

” flashes, and the alarm sounds

.

•

“

Charge Battery

” is displayed. In this situation, the handset cannot be operated.

*1 If the low battery warning occurs during a conversation, the call will be automatically disconnected

one minute after the alarm sounds.

Replacing the Battery

If “

” flashes after using the phone for a short time, even when the battery has been fully

charged, the battery should be replaced.
Before replacing the battery, make sure the low battery warning is displayed, then turn off
the power to prevent memory loss. Replace the battery and charge the new battery for about
7 hours.
If you replace the battery before the low battery warnings appears, the battery strength icon
may display an incorrect reading. In this case, use the handset as normal with the new
battery installed. When the low battery warning is displayed, charge the battery for about 7
hours. The battery strength icon will then display the correct reading.

1.

Turn the power off to prevent memory loss.

2.

Press the notch on the cover firmly and slide it as indicated by the
arrow.

3.

Open the cover and replace the battery.

4.

Close the cover and charge the handset.

•

Please use a Panasonic battery with the service part number N4HHGMB00005 or
HHR-P103.

This product is powered by a recyclable nickel-metal hydride battery.
Please call 1-800-8-BATTERY for information on how to recycle this battery.
There is a danger of explosion if the battery is incorrectly replaced.

67

Important Information

Important Information

«
...
65
66
67
68
69
...
»

Summary of Contents for KX-TD7685 - Wireless Digital Phone













































































Reviews:

No comments

Related manuals for KX-TD7685 - Wireless Digital Phone

Brand: Panasonic Pages: 10

Brand: Panasonic Pages: 72

Brand: AT&T Pages: 4

Brand: Denver Pages: 27

Brand: CHARITY MOBILE Pages: 14

Brand: Yealink Pages: 4

KYOCERA DuraPlus AT3082A

Brand: AdvanceTec Pages: 8

Brand: Philips Pages: 2

ThinkLink SE8881B/38

Brand: Philips Pages: 3

Brand: Philips Pages: 45

Brand: AGFEO Pages: 8

T2418 - 2.4 GHz Analog Cordless Phone

Brand: VTech Pages: 27

Brand: GAI-Tronics Pages: 14

Brand: Uniden Pages: 52

Brand: Grundig Pages: 128

Brand: Coral Telecom Pages: 73

Excursion 39765

Brand: Northwestern Bell Pages: 30

Brand: LG-Nortel Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands