Panasonic KX-TD7685 - Wireless Digital Phone, Service Manual

Page: 19 / 74

19
KX-TD7685
D) Test Command "AD1"
1.Click [Command menu] button.
2.Point [battery] .
3.Click [VBAT1 read (AD1)] .
4.Click [Send] button.
(if returned value is "OK", It succeeded. )
E) Test Command "loopback mode (PP)"
1.Click [Command menu] button.
2.Point [RF] .
3.Point [test mode] .
4.Click [loopback mode (PP)] .
5.Set RFPI(5byte) to the first parameter.
(RFPI should be same as the value input to the instrument)
6.Click [Send] button.
((If returned value is "OK", it succeeded.)
F) Test Command "RSSI read (RSS)"
1.Click [Command menu] button.
2.Point [RF] .
3.Click [RSSI read (RSS)] .
4.Click [Send] button.
(Returned value are RSSI value and number of frame error)
G) Test Command "eeprom write (EPW)"
1.Click [Command menu] button.
2.Point [memory access] .
3.Click [eeprom write (EPW)] .
4.Set parameters as follows.
•First parameter: address No. (2 byte)
•Second parameter: Length ("1"-"10"(Hex))
•Third parameter: Data
5.Click [Send] button.
(Returned value is data you wrote. )
H) Test Command "set modulation (SMR)"
1.Click [Command menu] button.
2.Point [RF] .
3.Click [set modulation (SMR)] .
4.Set first parameter "25" as a provisional value.
5.Click
[Send] button.
(Returned value is data you wrote.)
*Please adjust this value until the modulation reaches a value closest to ± 375kHz.
I) Test Command "PS ID write(IDW)"
1.Click [Command menu] button.
2.Point [RF] .
3.Click [PS ID write(IDW)] .
4.Set ID of Handset (5 byte) to the first parameter.
ID for Service
1DFFF0xxxx (xxxx-0000~1FFF)
Manage well so that there’s no overlap on PSID.
5.Click [Send] button.
(if returned value is "OK", It succeeded.)