Panasonic KX-TD7684 - 2.4Ghz Wireless System Telephone Page 59 Operating Instructions Manual Download

Page: 59 / 68

Troubleshooting and Error Messages

Document Version 2007-06

Error Messages

Error Messages

Error Message

Possible Cause

Solution

Register Unit

The handset has been canceled

or the handset has not been reg-

istered.

Consult your dealer.

No Service

The handset is out of range.

Move closer to the CS.

The CS is turned off.

Make sure the power cord is con-

nected.

PS Not Connected

The called handset is out of range

or is not turned on.

Try again later.

CS Busy

The CS is busy.

Try again later.

Please Wait...

The handset is connecting to the

CS or PBX.

Wait for a moment.

Charge Battery

The handset battery has little

charge remaining.

Charge the battery fully. (See

“Charging the Battery” on page 5.)

No Entries

When trying to view the Phone-

book: No items have been stored.

(See “Storing an Item in the Hand-

set Phonebook” on page 35.)

When trying to view the Incoming

or Outgoing Call Log: No logs

have been stored.

Memory Full

The Phonebook is full and cannot

store the new item.

Remove unnecessary data in the

Phonebook and try again.

Incorrect Entry

The numbers you entered are

invalid.

Recheck your entry (max. 5 digits)

and try again.

Need Repair 1(-2)

Consult your dealer.

Summary of Contents for KX-TD7684 - 2.4Ghz Wireless System Telephone





































































Search results

Summary of Contents for KX-TD7684 - 2.4Ghz Wireless System Telephone

Reviews:

Related manuals for KX-TD7684 - 2.4Ghz Wireless System Telephone

Brands by name

Popular brands

Panasonic KX-TD7684 - 2.4Ghz Wireless System Telephone, Operating Instructions Manual

Search results

Summary of Contents for KX-TD7684 - 2.4Ghz Wireless System Telephone

Reviews:

Related manuals for KX-TD7684 - 2.4Ghz Wireless System Telephone

Brands by name

Popular brands