Panasonic KX-TD7684 - 2.4Ghz Wireless System Telephone Operating Instructions Manual Download

Page: 47 / 68

Configuring Handset Settings

Document Version 2007-06

Changing the Initial Settings

You can customize the handset by editing the settings found under “

Setting Handset

”

in the menu list, as follows:

•

To return to the previous menu, press

•

To cancel, press

at any time.

•

The handset will beep to indicate that the new settings have been saved.

Changing the Initial Settings

Press the

Joy-

stick

Select “

Set-

ting Handset

”.

Press the

Joy-

stick

Select the desired

main item.

Press the

Joy-

stick

Follow the setting.

Select the

desired sub item.

Press the

Joystick

Press the

Joy-

stick

Summary of Contents for KX-TD7684 - 2.4Ghz Wireless System Telephone





































































Search results

Summary of Contents for KX-TD7684 - 2.4Ghz Wireless System Telephone

Reviews:

Related manuals for KX-TD7684 - 2.4Ghz Wireless System Telephone

Brands by name

Popular brands

Panasonic KX-TD7684 - 2.4Ghz Wireless System Telephone, Operating Instructions Manual

Search results

Summary of Contents for KX-TD7684 - 2.4Ghz Wireless System Telephone

Reviews:

Related manuals for KX-TD7684 - 2.4Ghz Wireless System Telephone

Brands by name

Popular brands