Panasonic KX-TD1232JT, Programming Manual

Page: 164 / 402

2.6 COS Programming
164 General Programming
[504] Call Forwarding to Outside Line
Description
This programme determines which Classes of Services (COS) are allowed to perform the Call
Forwarding to Outside Line function.
Selection
• COS number: 1 through 8, ( =all COS)
• Disable / Enable
Default
All COS – Disable
Programming
1.
Enter 504.
Display: Call FWD to CO
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all COS to one selection, press the key in step 3. In this case, the display shows
the contents programmed for COS 1.
• This feature is only available for an ISDN line. When a call is received through an ISDN
line, it can be forwarded through an analogue line as well as ISDN line. However, if a call
is received through an analogue line, it can only be forwarded through an ISDN line.
Features Guide References
Call Forwarding