Panasonic KX-TD1232C User Manual Download

Page: 200 / 384

Station Features and Operation (DPT/SLT)

200

User Manual

Having a conversation with a party

- If you want to hold the current call

Monitoring

Having a conversation with the party

Conditions

•

The LCS indicator shows the feature status as follows.

Red (steady) : The Live Call Screening mode is on.
Off : The Live Call Screening mode is off.
Flashing green slowly : Live Call Screening is acting.

Flashing green rapidly : Alarm tone is ringing in the Private mode.

•

The Two-Way Record indicator shows the feature status as follows.

On : Recording the conversation
Off : Not recording

The DSS button indicator lights red steady while Live Call Screening is active.

Press the flashing
LCS (flexible button).

(LCS)

Lift the handset or press
SP-PHONE.

Lift the handset or press
SP-PHONE/MONITOR.

Hang up or press
SP-PHONE/MONITOR.

Press HOLD.

HOLD

Monitoring Starts.

An alarm tone is sent.

Press the flashing LCS
(flexible button).

(LCS)

Lift the handset or press
SP-PHONE.

Summary of Contents for KX-TD1232C

































































































































































































































































































































































































Search results

Summary of Contents for KX-TD1232C

Reviews:

Related manuals for KX-TD1232C

Brands by name

Popular brands

Panasonic KX-TD1232C, User Manual

Search results

Summary of Contents for KX-TD1232C

Reviews:

Related manuals for KX-TD1232C

Brands by name

Popular brands