Panasonic KX-TCD951EB Operating Instructions Manual Download Page 27

Page: 27 / 48

Chapter 3

Advanced Operations

Other Programmable Settings

Setting the Range
Warning Alarm

You can choose whether or not the handset will
sound a range warning alarm. The factory
preset is OFF.

Setting the Key Tones

You can choose whether or not the handset
keys will sound tones (key tone, confirmation
tone, error tone). The factory preset is ON.

Press .

Press

until “

F2 i

” is displayed,

then press

•

The current setting is displayed.
1: ON 0: OFF

Press

to select the desired

setting.

•

You can press

to select OFF

or ON.

Press .

•

If ON is selected, a confirmation tone
sounds. The display will return to the
stand-by mode.

PROG

Press .

Press

until “

F26

” is displayed,

then press

•

The current setting is displayed.
1: ON 0: OFF

PROG

Press

to select the desired

setting.

•

You can press

to select OFF

or ON.

Press .

•

A confirmation tone sounds and the
display will return to the stand-by mode.

PROG

Press .

Press

until “

F25

” is displayed,

then press

•

The current setting is displayed.
1: ON 0: OFF

Press

to select the desired

setting.

•

You can press

to select ON or

OFF.

Press .

•

A confirmation tone sounds and the
display will return to the stand-by mode.

PROG

Setting the Battery Low Alarm

You can choose whether or not the handset will sound a battery low alarm. The factory preset is ON.

F26

Ex. ON is selected.

F2 i

Ex. ON is selected.

F25

Ex. OFF is selected.

KX-TCD951EB(022~029) 99.6.16 5:38 PM Page 27

Summary of Contents for KX-TCD951EB

















































Search results

Summary of Contents for KX-TCD951EB

Reviews:

Brands by name

Popular brands

Panasonic KX-TCD951EB, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD951EB

Reviews:

Brands by name

Popular brands