20
Setting the Key Lock
You can lock the handset dialling buttons. Only incoming calls are accepted until the key lock is
cancelled.
When the unit is in the stand-by mode, press and hold
until a beep sounds.
•
“
” is displayed and all dialling buttons are locked.
To cancel the key lock
When the unit is in the stand-by mode, press and hold
for about 2 seconds.
•
“
” will disappear and the key lock will be cancelled.
•
The key lock will also be cancelled when the power is turned OFF (p. 12).
PROG
PROG
Special Features
1
Press .
•
The in use indicator (
) flashes on the base unit.
•
The handset rings for 1 minute and “
” flashes.
•
The base unit is displayed as “
[0]
”.
Handset Locator
From the base unit, you can locate the handset or page a person at the handset with ring tones.
2
To stop paging, press
again or press
on the handset.
Handset 1 display
[ i ]- [ 0 ]
Temporary Tone Dialling
(For Rotary or Pulse Service Users)
Press
before entering access numbers which require tone dialling.
•
The dialling mode changes to tone. You can enter numbers to access an answering service,
electronic banking service, etc. When you hang up, the mode will return to pulse.
KX-TCD951EB(016~021) 99.6.16 7:09 PM Page 20
