Useful Information
69
Data from other devices
When I try to operate the
answering system with the base
unit, the answer on indicator
flashes for a few seconds and I
cannot operate the answering
system.
L
Another handset is being used. Wait for the other
user to finish.
L
A caller is leaving a message. Wait for the caller to
finish.
I cannot operate the answering
system remotely.
L
You are entering the wrong remote access code. If
you forget the remote access code, store a new
remote access code again (page 54).
L
You are pressing the dial keys too quickly. Press
each key firmly.
L
The answering system is turned off. Turn it on (page
55).
L
You are using a pulse telephone. Try again using a
touch tone phone.
While recording a greeting
message or listening to messages,
the unit rings and recording stops.
L
A call is being received. Answer the call and try
again later.
Problem
Cause & solution
I cannot reduce the size of a
picture.
L
You are trying to reduce a phonebook-size picture
(64 x 68). Phonebook pictures and pictures smaller
than 64 x 68 cannot be reduced.
The wallpaper pattern or ringtone I
set has been changed to its default
setting.
L
You erased the picture or ringtone that you set for
wallpaper or user ringtone (handset ringtone,
memo alarm, or category ringtone).
Copy failed during an infrared
transmission.
L
The infrared signal is not being transmitted
properly. See page 42 for more information.
I received a phonebook entry, but
not all of the data was received.
L
Only names and phone numbers (0–9,
*
, #) can be
received.
L
You can receive up to 3 phone numbers for each
entry.
L
Only characters shown in the character entry tables
(page 61) can be displayed.
L
Lowercase letters may be converted to uppercase
letters.
L
Only the first 16 characters of a name and the first
24 digits of a phone number can be received. Data
that exceeds this limit will not be received.
Problem
Cause & solution
TCD820FX(e-e).book Page 69 Tuesday, September 13, 2005 9:10 AM
