manualshive.com logo in svg

Panasonic KX-TCD515E, Operating Instructions Manual, Page: 63 / 96

Share
Download
Panasonic KX-TCD515E Operating Instructions Manual Download Page 63

Helpline Tel.No. :U.K. 08700 100 076  R.O.I. 01289 8333

63

Cordl

ess Tel

e

phone

Multi-Unit User Operations

Handset Registration to a Base Unit

The handset supplied with the base unit is already registered. If an optional handset is 
purchased, it must be registered as follows.

Charge the optional handset batteries for 7 hours before initial use.
Handset registration must be completed within 1 minute after pressing the 

. 

If over 1 minute, press 

 then start over again. 

To exit the operation, press 

 at any time.

•

If you enter the incorrect Base Unit PIN, the error tone sounds and repeat from step 

1

.

•

To register an handset to more than one base unit, repeat from step 

1

 with the other 

base unit(s).

•

The handset main menu may changes corresponding to the base unit registered to.

1

Press 

JOYSTICK

 

(or move).

2

Select “

 Setting 

Handset

”.

3

Select 
“

Registration

”.

4

Select “

Register 

H/set

”.

5

Press and hold 

 on the Base Unit (for about 3 

seconds) until the tone sounds.

•

If all registered handset(s) start ringing (paging), press 

 to stop paging then start over again.

6

Select the desired 
base unit.

7

Enter 4-digit Base Unit 
PIN.
(Factory Preset 0000)

8

Press 

JOYSTICK

.

When a handset is registered successfully, a confirmation tone sounds and the “

” 

icon is displayed.

515E_E.book  Page 63  Friday, June 27, 2003  2:23 PM

Summary of Contents for KX-TCD515E

































































































Reviews:

No comments