Panasonic KX-TCD510BXM Operating Instructions Manual Download Page 34

Page: 34 / 80

Handset Settings

Memo Alarm

To exit the operation, press

at any time.

Setting the Alarm Mode “

Once

” or “

Daily

”

•

When setting the time, remember to select 12 or 24 hour clock (p.13).

•

Memo Alarm volume depends on handset ringer volume. Even if you set ringer to off,
only Memo Alarm still rings.

Set the date and time before setting the memo alarm (p.13).

Press

JOYSTICK

(or move).

Select “

Setting Handset

”.

Select “

Memo Alarm

”.

Select the desired alarm number
(1-3).

Go to step

Follow steps

shown above, then:

Select “

Once

” or

“

Daily

”.

“

Once

”: Enter the

date and time.
“

Daily

”: Enter the

time.

Press

JOYSTICK

Enter a memo
message (max. 32
characters, p.26) then
press

JOYSTICK

Select the desired
ringer pattern.

Select “

Save

”, then

“

Saved

” is displayed.

510BX_e.book Page 34 Thursday, June 5, 2003 9:43 PM

Summary of Contents for KX-TCD510BXM

















































































Search results

Summary of Contents for KX-TCD510BXM

Reviews:

Related manuals for KX-TCD510BXM

Brands by name

Popular brands

Panasonic KX-TCD510BXM, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD510BXM

Reviews:

Related manuals for KX-TCD510BXM

Brands by name

Popular brands