Panasonic KX-TCD412NZM, Service Manual

Page: 49 / 114

Note:
After the measuring, sock up the solder of TP.
* :
PC Setting () is required beforehand.
The connection of adjustment equipment are as shown in Adjustment Standard (Handset) ().
15.2. Adjustment Standard (Handset)
When connecting the Simulator Equipments for checking, please refer to below.
Note:
(A) - (P) is refered to
ADJUSTMENTS (HANDSET) ()
16. RF SPECIFICATION
16.1. Base Unit
Item Value Refer to -. * Remarks
TX Power More than 20 dBm ~ 25
dBm
Adjustment (Base Unit) (H)
Modulation 340 kHz/div ~ 402 kHz/div
Adjustment (Base Unit) (I)
Data type: Fig31
Frequency Offset -40 kHz ~ +40 kHz
Adjustment (Base Unit) (J)
RX Sensitivity < 1000 ppm
Adjustment (Base Unit) (K)
Timing Accuracy < ± 5.0 ppm Adjustment (Base Unit) (L)
RSSI Level 0x34 hex ± A hex Adjustment (Base Unit) (M)
* : Refer to Adjustment (Base Unit) ()
16.2. Handset
Item Value Refer to -. ** Remarks
TX Power More than 20 dBm ~ 25
dBm
Adjustment (Handset) (I)
Modulation 340 kHz/div ~ 402 kHz/div
Adjustment (Handset) (J)
Data type: Fig31
Frequency Offset -40 kHz ~ +40 kHz
Adjustment (Handset) (K)
RX Sensitivity < 1000 ppm
Adjustment (Handset) (L)
Timing Accuracy < ± 10 ppm Adjustment (Handset) (M)
RSSI Level 0x34 hex ± A hex Adjustment (Handset) (N)
** : Refer to Adjustment (Handset) ()
49