PCB AND REMEDY FOR “LOST LINK”
11.1. Preparation
First of all, you need to enable the menu for Registration in Handset and Base unit.
11.1.1. Enabling Multi Handset Menu in Handset
To register new Handset to KX-TCD400 Base Unit, you need to change a parameter in EEPROM
on Handset. This parameter is to switch Programming Menu for Multi Handset.
<STEP>
1. Press [Menu] - [Down] - [Right] - [Down] 5 times - [Right]. Then
"HSPIN CHANGE" is displayed.
2. Press [Right]. Then "OLD PIN _ _ _ _" is displayed.
3. Press Handset PIN (0000). Then "NEW PIN _ _ _ _" is displayed.
4. Press [0163]. Then "VERIFY
_ _ _ _" is
displayed.
5. Press [3811]. Then long beep sound and "E
" is
displayed.
6. Press [2]. Then "E2 _ _ _ _
_ _" is displayed.
7. Press [0 RECALL 5 5 3 ]. Then "E2 0F53 20" is displayed.
8. Press [RECALL 5 RECALL 5]. Then "E2 0F53 FF" is displayed.
9. Press [Right]. Then long beep sounds and "E2 0F53 - FF" is
displayed.
Now all menus for multi Handset are available in Setting Handset.
25