Panasonic KX-TCD400E, Operating Instructions Manual

Page: 6 / 32

6
Setting up
Symbols Used in This Operating Instructions
Replacing the Batteries
If the icon flashes after a few telephone calls even when the handset batteries have
been fully charged, 2 batteries must be replaced.
Charge new batteries for approximately 7 hours before initial use.
(The telephone line cord must not be connected to the telephone socket at this
time.)
When replacing the batteries, ensure that the correct battery type is selected.
Selecting the Battery Type
•
T
o exit the operation, press any time.
•
When Ni-Cd batteries are fitted with the
"BATTERY TYPE"
setting in
"NI-MH"
,
icon will disappear and stop charging even if the handset is on the cradle.
•
Do not use non-rechargeable batteries. If non-rechargeable batteries are fitted and
start charging, it may cause the leakage of the battery electrolyte.
Please use only Panasonic P03P(Ni-MH) or P03H(Ni-Cd) batteries.
Symbol Meaning
To search the desired item, press UP or DOWN .
To select the desired item, press RIGHT .
To search and then to select the desired item, press UP or DOWN then
RIGHT .
To move the cursor to the right or to the left, press RIGHT or LEFT .
To go to the next step.
" "
The words in
" "
indicate the words in display.
Search/Select
"OTHER OPT"
.
Search/Select
"SETTING HS"
.
2 3
Search/Select
"BATTERY TYPE"
.
Search/Select
"NI-CD"
or
"NI-MH"
.
4
5
Press
MENU .
1
400E.book Page 6 Thursday, June 12, 2003 2:48 PM