Phone Book
20
You can store up to 10 names and phone numbers in the phone book.
Using the phone book, you can make a call by selecting a name on the
handset display.
Storing Names and Numbers
Make sure the unit is in the standby mode.
1
Press
[AUTO/PROGRAM]
.
2
Press a memory station number (
[0]
to
[9]
).
≥
If an item is already stored, that information is
displayed.
3
Press
[EDIT]
.
4
Enter a name, up to 15 characters, using
the dialing buttons (
[1]
to
[9]
), or .
≥
See the steps for entering names and symbols
(p. 21).
≥
If a name is not required, press
[EDIT]
and go
to step 6.
5
Press
[EDIT]
.
6
Enter a phone number, up to 24 digits.
≥
Each time you press
[MUTE/CLEAR]
, the digit
is erased from the right. To erase all of the
digits, press and hold
[MUTE/CLEAR]
.
≥
To show the cursor, press
after entering a
digit. Each time you press
[MUTE/CLEAR]
,
the digit under the cursor is erased.
≥
When you store the last number dialed, press
[PAUSE/REDIAL]
instead of entering a phone
number.
7
Press
[EDIT]
to save.
≥
A beep sounds.
≥
The handset will return to the standby mode.
≥
If a pause is required for dialing,
[PAUSE/REDIAL]
can be stored in a phone
number counting as one digit (p. 26) in step 6.
≥
You can exit the programming mode at any time by pressing
[OFF]
.
≥
If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
[ ]
[ ]
[ ]
EMPTY
ENTER NAME :
TOM
ENTER NUMBER :
SELECT STATION#
TOM
TOM
PQQX14062ZA-4 04.2.5 10:30 AM ページ 20
