1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features
Feature Guide
45
•
Boss & Secretary feature
It is possible to call the original extension from the destination extension regardless of the forward
setting.
•
Message Waiting
When a call is forwarded, Message Waiting information is not forwarded. The Message button light
turns on at the originally called extension. (
→
•
Idle Extension Hunting
Idle Extension Hunting applies to calls forwarded to a busy extension in an idle extension hunting group.
[All Calls and Busy]
•
If the forward destination is not available to answer a call, this feature is canceled and the original
destination will ring for the following types of calls:
–
Doorphone call
–
CO Line calls
[No Answer and Busy/No Answer]
•
No Answer Time
The number of rings before the call is forwarded is programmable for each extension (
→
Forwarding—No Answer Time [605]).
[Follow Me]
•
This feature is only available when "
Deny Remote Operation by Other Extension
" is disabled
for the original extension's COS.
Feature Guide References
User Manual References
1.3.1.3
Do Not Disturb (DND)
Description
An extension user can make use of the Do Not Disturb (DND) feature. If this feature is set, calls will not arrive
at the extension, but arrive at other extension by using the Idle Extension Hunting feature (
→
Extension Hunting) or the Intercept Routing—Busy/DND feature (
→
1.1.1.4 Intercept Routing). When a
FWD—All Calls
Call or
transfer a call
Boss
(Original)
Secretary
(FWD destination)
Incoming
call
Summary of Contents for KX- TAW848
