background image

2.1 Control Features

102

User Manual

2.1

Control Features

2.1.1

Extension Control

The manager extension can control the settings of other extensions.

Changing the Settings of Other Extensions

 Changing the Settings of Other Extensions

Remote Extension Dial Lock

This feature is also known as Remote Station Lock Control.

2.1.2

Time Service Mode Control

The manager extension or the preprogrammed extension can change the time mode (Day, Lunch, Break or 
Night).
There are two methods (Automatic or Manual) of changing the time modes.

Automatic:

 enables the time mode for each day of the week to change automatically. You may also change 

it manually.

Manual:

 enables to change a mode in manual as follows.

To change the time mode (Day/Night/Lunch/Break)

The manager can use Remote Extension Dial Lock to unlock any extension, whether that 
extension was locked remotely (Remote Extension Dial Lock) or from the extension itself 
(Extension Dial Lock).

Off-hook.

PT/SLT/PS

Enter    

78

.

8

7

Enter 

extension 

number

.

extension no.

Enter 

2

 to unlock

or 

3

 to lock.

2

3

Unlock

Lock

On-hook.

OR

PT/PS

Press 

Time Service 

(Day/Night/Lunch/Break)

until the desired mode 
appears.

While on-hook

(Time Service
(Day/Night/
Lunch/Break))

Summary of Contents for KX- TAW848































































































































































Reviews:

Related manuals for KX- TAW848