manualshive.com logo in svg

Panasonic KX-TA1232, Features Manual, Page: 144 / 224

Share
Download
Panasonic KX-TA1232 Features Manual Download Page 144

General Features

144

Features Guide

Night Service

Description

The system supports both night and day modes of operation. The system operation for 
originating and receiving calls can be different for day and night modes. The system operation 
for restricting toll calls can be arranged separately to prevent unauthorized toll calls at night. 

Switching the Day / Night Mode

Day / Night mode can be switched either automatically at a pre-assigned time or manually by 
a pre-assigned extension, operator or the manager at any desired time.
Class of Service programming determines which extensions can perform this.

Automatic Night Service:

If you select the automatic switching mode, your system will switch the day / night mode 
at the programmed time each day. The starting time of the day / night mode can be set for 
each day.

Manual Night Service:

If you select the manual switching mode, the pre-assigned extension, operator or the 
manager can switch the day / night mode by dialing the feature number or pressing the 
Night button.

Conditions

•

The following programming items may be assigned differently for the day and night modes.

[407-408] DIL 1:1 Extension —— Day / Night

[409-410] Intercept Extension —— Day / Night

[500]-[501] Toll Restriction Level —— Day / Night

[603-604] DIL 1:N Extension and Delayed Ringing —— Day / Night

[605-606] Outgoing Permitted Outside Line Assignment —— Day / Night

[607-608] Doorphone Ringing Assignment —— Day / Night

Programming Guide References

•

[100] Flexible Numbering

•

[101] Day / Night Service Switching Mode

•

[102] Day / Night Service Starting Time

•

[510] Night Service Access

Features Guide References

None

User Manual References

•

2.2.2 Flexible Button Assignment

•

4.3.57 Night / Day (Lunch / Break) Service

Summary of Contents for KX-TA1232

































































































































































































































Reviews:

No comments