manualshive.com logo in svg

Panasonic KX-T2375ALW, Operating Instructions Manual

Share
Download
Panasonic KX-T2375ALW Operating Instructions Manual Download Page 13

13

Basic Operation

Using the speakerphone

1

Press 

(SP-PHONE/HEADSET)

.

≥

The indicator lights.

2

Dial a phone number.

≥

The dialled number is displayed.

≥

After a few seconds, the display will show the length of the call.

≥

If you misdial, press 

(SP-PHONE/HEADSET)

and start again from step 1.

3

When the other party answers, talk into the MIC (microphone).

4

To hang up, press 

(SP-PHONE/HEADSET)

.

≥

The indicator light goes out.

≥

The display will return to the standby mode.

To redial the last number dialled

Using the handset: Lift the handset 

¤

press 

(REDIAL)

.

Using the speakerphone: Press 

(SP-PHONE/HEADSET)

¤

¤

press 

(REDIAL)

.

Making Calls

“

You can make a call by simply lifting the handset. To hang up, place the
handset on the cradle.

VOLUME 

(_)

, 

(^)

 

(SP-PHONE/HEADSET)

 and Indicator

(HOLD)

(REDIAL)

MIC (Microphone) 

Automatic Redial:

When using the speakerphone, the unit redials the last dialled number up to
10 times within a 7-minute period if the line is busy. During redial, the
SP-PHONE/HEADSET indicator light flashes.

PQQX13367ZA-BM03  02.1.9 8:59 AM   y [ W  13

Summary of Contents for KX-T2375ALW





































Reviews:

No comments

Brands by name

Popular brands

Load more brands