18
Operation indicator and warning beep
When scanning documents, check the operation indicator light.
Operation
Indicator
Green light
Slow flash
Green light
Fast flash
Red light
ON
Red light
ON
Light OFF
Light OFF
Warning Beep
No beep
No beep
Green light
ON
No beep
No beep
1 beep
3 beeps
No beep
Situation
Remedy
The document is being scanned properly.
(Fine letter mode)
To start scanning again,
press (Start).
Move it more slowly.
Move it more slowly.
Delete the contents scanned in
the scanner (See page 21).
Scan the document as 2 pages or
more.
The document is being scanned properly.
(Standard letter mode)
The hand scanner has temporarily stopped during
scanning.
You did not move the hand scanner for more than
30 seconds, so it has stopped scanning
automatically.
The hand scanner is being moved quickly.
(The document is being scanned.)
The hand scanner is being moved too quickly.
(Some parts of the document may not be scanned,
or the scanned contents may be too compressed.)
The scanner memory is full.
(The memory indicator green light will flash fast.)
You have scanned a document that is more than
1.5m in length as 1 page.
The scanner is not in operation.
Memory indicator
Shows the amount of scanner memory being used.
Memory indicator
(green light)
OFF
ON
Flash slow
Flash fast
Memory used
0%
〜
66%
〜
99%
100%
Using the hand scanner
Memory indicator
Operation indicator
