One touch eco mode
The
M
R/ECO
N
button on the handset enables
you to activate the eco function with one
touch.
By activating eco mode, your unit can reduce
the base unit transmission power by up to
90 % in standby mode.
You can turn on/off one touch eco mode by
just pressing
M
R/ECO
N
. The default setting is
“
Normal
”
.
– When the one touch eco mode is on:
“
Low
”
is temporarily displayed and
is shown
on the handset display instead of
.
– When the one touch eco mode is off:
“
Normal
”
is temporarily displayed and
goes off from the handset display.
Note:
R
Activating one touch eco mode reduces the
range of the base unit in standby mode.
R
If you set the DECT repeater mode to
“
On
”
(page 33):
– One touch eco mode is cancelled.
–
“
Eco Setup
”
is not shown in the
display menu (page 24).
Dialling mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is
“
Tone
”
.
“
Tone
”
: For tone dial service.
“
Pulse
”
: For rotary/pulse dial service.
1
M
Menu
N
(right soft key)
#120
2
MbN
: Select the desired setting.
3
M
OK
N
a
M
N
13
Getting Started
PRW110BX_UE_(en-en)_1120_ver043.pdf 13
11/20/2013 1:50:56 PM
