1
M
Menu
N
(right soft key)
#137
2
MbN
: Select the desired base unit number,
or
“
Auto
”
.
a
M
OK
N
Cancelling a base unit
A handset can cancel a base unit that it is
registered to. This allows the base unit to end
its wireless connection with the system.
1
M
Menu
N
(right soft key)
#139
2
MbN
: Select the base unit you want to
cancel.
a
M
OK
N
3
MbN
:
“
Yes
”
a
M
OK
N
a
M
N
Increasing the range of the base
unit
You can increase the signal range of the base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 3. Contact your Panasonic dealer for
details.
Important:
R
Before registering the DECT repeater to
this base unit, you must turn the DECT
repeater mode on.
R
Do not use more than one DECT repeater
at a time.
Setting the DECT repeater mode
1
M
Menu
N
(right soft key)
#138
2
MbN
: Select the desired setting.
a
M
OK
N
a
M
N
Registering the DECT repeater
(KX-A405) to the base unit
Note:
R
Please use a DECT repeater that has not
yet been registered to another unit. If the
DECT repeater is registered to another unit,
deregister it first, referring to the Installation
Guide for the DECT repeater.
1
Base unit:
Press and hold
M
N
for about 5 seconds.
2
DECT repeater:
Connect the AC adaptor, then wait until
the
indicator and
indicator light
green.
3
Base unit:
To exit the registration mode, press
M
N
.
33
Programming
PRW110BX_UE_(en-en)_1120_ver043.pdf 33
11/20/2013 1:50:57 PM
