2
Finding the controls
Main unit
1
Liquid crystal display
The display turns off after about 2 minutes of
inactivity.
To turn on the display, press
(Stop).
2
Fax button starts faxing.
3
Copy button starts copying.
4
Stop button
5
Auto Answer button & indicator
— light on: answering device activated.
— light off: used as a regular telephone.
6
SD Memory Card slot (See page 25.)
7
Playback button plays back recorded messages.
Flash button (For call waiting service users.)
8
Hold button
Intercom button
9
Caller ID Log/Fax List button starts a search in
— the Number Display (Caller ID) log.
— the fax list stored in memory.
Caller ID Log/Fax List indicator lights when
— a call was missed. (For Number Display service
users.)
— a fax was stored in memory.
10
Monitor button
11
Phonebook button
12
Multi-operation buttons refer to the function
displayed on the display panel.
13
Function/Set button
To initiate programming.
To store a parameter.
14
Volume/Change key
To adjust the volume (see below).
To change Hiragana into Kanji.
To adjust the
ringer volume when the unit is on
stand by
(Select “
呼出音量設定
”)
(Function/Set)
(press repeatedly)
(Function/Set) or
(Stop)
To adjust the
receiver volume while talking,
press repeatedly.
To adjust the
speaker volume while listening
to the recorded messages or using the monitor,
press repeatedly.
15
Tone button switches to tone dialing.
Night mode button
16
Sharp button
Key lock button can lock the main unit so that no calls
or settings can be made. To turn key lock on, press
this button for about 3 seconds until a single beep is
heard.
To turn key lock off, press this button for about
3 seconds.
