Panasonic KX-P1131E Page 3 Operating Instructions Manual Download

Page: 3 / 49

Abbreviations

Windows

refers to the Microsoft

Windows

operating system.

Windows

2000 refers to the Microsoft

Windows

2000 operating system.

Windows

XP refers to the Microsoft

Windows

XP operating system.

Windows Vista

refers to the Microsoft

Windows Vista

operating system.

Windows

7 refers to the Microsoft

Windows

7 operating system.

Trademarks

•

Microsoft, Windows, Windows Vista are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.

•

IBM, AT and Proprinter are trademarks of International Business Machines Corporation in the United
States, other countries, or both.

•

Epson is a registered trademark of Seiko Epson Corporation (SEC), registered in the U.S. and other
countries.

•

All other trademarks identified herein are the property of their respective owners.

International ENERGY STAR Program

As an ENERGY STAR

Partner, Panasonic has determined that this product meets

the ENERGY STAR guidelines for energy efficiency.

Operating Instructions

Introduction

Summary of Contents for KX-P1131E


















































Search results

Summary of Contents for KX-P1131E

Reviews:

Related manuals for KX-P1131E

Brands by name

Popular brands

Panasonic KX-P1131E, Operating Instructions Manual

Search results

Summary of Contents for KX-P1131E

Reviews:

Related manuals for KX-P1131E

Brands by name

Popular brands