background image

Plug the power cord firmly into an AC
outlet. Otherwise, it can cause fire or
electric shock.

Do not pull, bend, rest objects on, or
chafe the power cord and plug. Damage
to the power cord or plug can cause fire
or electric shock.

Do not attempt to repair the power cord,
or plug. If the power cord or plug is
damaged or frayed, contact an
authorized service representative for a
replacement.

Ensure that the plug connection is free of
dust. In a damp environment, a
contaminated connector can draw a
significant amount of current that can
generate heat, and eventually cause fire
if left unattended over an extended
period of time.

Never touch the plug with wet hands.
Danger of electric shock exists.

Stop operation immediately if the unit
emits smoke, excessive heat, abnormal
smell or unusual noise. These conditions
can cause fire or electric shock.
Immediately turn the unit off, and unplug
the power cord, and contact your dealer
for service.

When disconnecting the unit, grasp the
plug instead of the cord. Pulling on a cord
forcibly can damage it, and cause fire or
electric shock.

Operating Safeguards

If metal fragments or water gets into the
unit, turn the unit off and unplug the unit
immediately. Contact your dealer for
service. Operating the contaminated unit
can cause fire or electric shock.

Do not open covers, and do not attempt
to repair the unit yourself. Contact your
dealer for service.

Do not alter the unit or modify any
parts.
Alteration or modification can cause fire
or electric shock.

During thunderstorms, do not touch the
unit and plug. It may cause an electric
shock.

8

Operating Instructions

Safety Information

Summary of Contents for KX-P1121E












































Reviews: