Wall Mounting
1
Insert the 5 tabs of the wall mounting adaptor into the designated
openings in the base, and then slide the wall mounting adaptor in
the direction of the arrow until it clicks.
2
Fasten the wall mounting adaptor to the base with 1 screw.
(Recommended torque: 0.4 N·m [4.08 kgf·cm/3.54 lbf·in] to 0.6 N·m
[6.12 kgf·cm/5.31 lbf·in])
3
Connect the cables to the unit, and run the cables through the wall
mounting adaptor, as shown in the illustration below.
4
Drive the 2 screws into the wall either 83 mm (3
1
/
4
in) or
100 mm (3
15
/
16
in) apart, and mount the unit on the wall.
Ethernet cables
AC adaptor
83 mm
100
mm
2
3
4
or less
40 mm (1
37
/
64
in)
Washer
Drive the screw
to this point.
(3
1
/
4
in)
(3
15
/
16
in)
26
Wall Mounting
Summary of Contents for KX-NT546
Page 12: ...Location of Controls 12 Location of Controls ...
Page 27: ...27 Notes ...