Operation Board Angle Adjustment
12
Operation Board Angle Adjustment
The angle of the operation board can be set to one
of eight angles (level 1 = 0°, level 8 = 45°).
CAUTION:
Hold the operation board until the operation board is secured at the
desired angle. Make sure you do not pinch your fingers when
raising or lowering the operation board.
To raise:
Gently lift the operation board one level at a
time.
To lower:
Raise the operation board to level 8. Next,
with one hand on the base of the unit, lift the
operation board again to release the latch,
then slowly push the operation board down
to level 1. If the operation board cannot be
lowered to level 1, repeat this step.
Locking the Handset Hook
Pull down the handset hook until it locks to prevent
the handset from falling off the handset cradle
when the unit is mounted to a wall or set at a high
angle. To temporarily place the handset down
during a conversation, hook it over the top edge of
the unit as shown.
1
2
3
4
5
6
7
8
Summary of Contents for KX-NT303
Page 22: ...Note 22 Note ...
