![background image](http://html2.mh-extra.com/html/panasonic/kx-mb283br/kx-mb283br_service-manual_4919478007.webp)
7
KX-MB283BR
3 Specifications
* Transmission speed depends on the contents of the pages, resolution, telephone line conditions and capability of the other party’s
machine.
** Transmission speed is based on the ITU-T No. 1 Test Chart with original mode. (Refer to
(P.196).) If
the capability of the other party's machine is inferior to your unit, the transmission time may be longer.
Note:
• Design and specifications are subject to change without notice.
• The pictures and illustrations in these instructions may vary slightly from the actual product.
• The accuracy of the clock is approximately ±60 seconds a month.
Applicable Lines:
Public Switched Telephone Network
Document Size:
Max. 216 mm in width
Max. 600 mm in length
Effective Scanning Width:
208 mm
Effective Printing Width:
Letter/ Legal: 208 mm
A4: 202 mm
Transmission Time*:
Approx. 4 s/page (ECM-MMR Memory transmission)**
Scanning Density:
Scanning resolution:
Up to 600
×
1,200 dpi (Optical)
Up to 9,600
×
9,600 dpi (Interpolated)
Copy resolution:
Up to 600
×
600 dpi (Scanner Glass)
Up to 600
×
300 dpi (Auto Document Feeder)
Photo resolution:
64-level
Scanner Type:
Color Contact Image Sensor
Printer Type:
Laser printer
Data Compression System:
Modified Huffman (MH), Modified READ (MR), Modified Modified READ (MMR)
Operating Environment:
10
°
C—32.5
°
C, 20—70 % RH (Relative Humidity)
Dimensions:
Approx. height 305 mm
×
width 420 mm
×
depth 445 mm
Mass (Weight):
Approx. 13 kg
Power Consumption:
Standby: Approx. 5.5 W
Preheat: Approx. 65 W
Copy: Approx. 320 W
Maximum: Approx. 900 W (When the fuser lamp turns on)
Power Supply:
127V AC, 60Hz
Memory Capacity (for operation and
storing memory):
32 MB
Laser diode properties:
Laser output: Max. 5 mW
Wave length: 760 nm—810 nm
Emission duration: Continuous
Print Speed:
Approx. 18 ppm (pages per minute)
Printing Resolution:
600
×
600 dpi
Summary of Contents for KX-MB283BR
