manualshive.com logo in svg

Panasonic KX-MB262CX, Service Manual

The Panasonic KX-MB262CX is a reliable and versatile multi-function printer that caters to your office needs. With its comprehensive Service Manual, you can access detailed instructions on operating and troubleshooting this device. Download the user manual for free from our website, ensuring seamless usage of your printer.

Share
Download
background image

KX-MB262CX/KX-MB772CX

11.4.1.

DESCRIPTIONS OF THE HISTORY REPORT

(1) ROM VERSION
FLASH ROM version
(2) SUM
FLASH ROM internal data calculation.
(3) YOUR LOGO (KX-MB772CX ONLY)
The  user  logo  recorded  in  the  unit.  If  it  is  not  recorded,
NONE will be displayed.
(4) YOUR TELEPHONE NUMBER  (KX-MB772CX ONLY)
The user telephone number recorded in the unit. If it is not
recorded, NONE will be displayed.
(5) Not used
(6) FACTORY - CUSTOMER (KX-MB772CX ONLY)
This shows how many days from factory production until the
user turns ON the unit.
(7) MONTH (KX-MB772CX ONLY)
The shows the very first month, date, year and time set by
the user after they purchased the unit.
(8) DAY (KX-MB772CX ONLY)
The shows the very first month, date, year and time set by
the user after they purchased the unit.
(9) YEAR (KX-MB772CX ONLY)
The shows the very first month, date, year and time set by
the user after they purchased the unit.
(10) TIME (KX-MB772CX ONLY)
The shows the very first month, date, year and time set by
the user after they purchased the unit.
(11) USAGE TIME
The amount of time the unit has been powered ON.
(12) FACTORY - NOW (KX-MB772CX ONLY)
This shows how many days from factory production until the
user prints out this history list.
(13) TEL MODE (KX-MB772CX ONLY)
The amount of time the TEL mode setting was used.
(14) FAX MODE (KX-MB772CX ONLY)
The amount of time the FAX mode setting was used.
(15) Not used
(16) Not used
(17) FINAL RECEIVE MODE (KX-MB772CX ONLY)
The last set receiving mode by the user.
(18) TONE/PULSE SELECTION (KX-MB772CX ONLY)
The  most  recently  used  setting  used,  either  TONE  or 
PULSE.
(19) RECEIVE REDUCTION (KX-MB772CX ONLY)
The compression rate when receiving.
(20) SETTING NO. OF DIRECTORY (KX-MB772CXONLY)
The recorded directory stations (one touch dial).
(21) NUMBER OF COPY
The number of pages copied.
(22) NUMBER OF RECEIVE (KX-MB772CX ONLY)
The number of pages received.
(23) NUMBER OF SENDING (KX-MB772CX ONLY)
The number of pages sent.
(24) NUMBER OF CALLER ID (KX-MB772CX ONLY)
The number of times Caller ID was received.
(25) Not used
(26) NUMBER OF PC SCAN
The number of times multifunction was used for the Scan-
ner.  (The  number  of  pages  scanned.  If  the  unit  does  not

(27) NUMBER OF PC-PRINT
The number of times multifunction was used  for the Printer.
(The number of pages printed. If the unit does not have a
PC interface, NONE will be printed.)
(28)  NUMBER  OF  RECEIVING  TO  PC  (KX-MB772CX
ONLY)
The number of times received in the PC through the USB
cable. (The number of pages received. If the unit does not
have a PC interface, NONE will be printed.)
(29)  NUMBER  OF  SENDING  FROM  PC  (KX-MB772CX
ONLY)
The number of times transmitted from the PC through the
USB  cable.  (The  number  of  pages  transmitted.  If  the  unit
does not have a PC interface, NONE will be  printed.)
(30) Not used
(31) NUMBER OF PRINTING HELP (KX-MB772CX ONLY)
The number of help lists printed until  now.
(32)  NUMBER  OF  DIVIDED  PRINTING  IN  FAX  RECEP-
TION (KX-MB772CX ONLY)
The number of faxes received that were divided into more
than one sheet since the unit was purchased.
(33)  Not used.
(34), (35) Not used.
(36) FAX MODE (KX-MB772CX ONLY)
Means the unit received a fax message in the  FAX mode.
(37) MAN RCV (KX-MB772CX ONLY)
Means the unit received a fax message by manual opera-
tion.
(38) FRN RCV (KX-MB772CX ONLY)
Means  the  unit  received  a  fax  message  by  friendly  signal
detect.
(39) Not used
(40) RMT DTMF (KX-MB772CX ONLY)
Means  the  unit  detected  DTMF  (Remote  Fax  activation
code) entered remotely.
(41) PAL DTMF (KX-MB772CX ONLY)
Means  the  unit  detected  DTMF  (Remote  Fax  activation
code) entered by a parallel connected telephone.
(42) TURN-ON (KX-MB772CX ONLY)
Means  the  unit  started  to  receive  after  10  rings.  (Remote
Turn On: Service Code #573)
(43) Not used
(44) IDENT (KX-MB772CX ONLY)
Means the unit detected Ring Detection.
(45) Not used
(46) Not used
(47) Not used
(48) Not Used
(49) Not Used
(50) Printing number of the drum unit
(51) Paddle rotation number of the drum uni t
(52) CALL SERVICE 3  failure cause record (the latest)
(53) CALL SERVICE 3  failure cause record (the last time)
(54)  CALL  SERVICE  3  failure  cause  record  (the  second
last time)
(55) NUMBER OF DOCUMENT JAM
(56) NUMBER OF PAPER JAM
(57)  NUMBER  OF  PICK  UP  ERROR  OF  RECORDING

Summary of Contents for KX-MB262CX












































































































Reviews:

No comments

Related manuals for KX-MB262CX

Unitech MP200 Product Reference Manual preview
MP200
Brand: Unitech Pages: 18
Unitech MP200 Developer'S Manual preview
MP200
Brand: Unitech Pages: 26
Panduit MP200 Firmware Update Instruction Manual preview
MP200
Brand: Panduit Pages: 6
Xerox WorkCentre 4265 Quick Use Manual preview
WorkCentre 4265
Brand: Xerox Pages: 20
Xerox Phaser 6120 Instructions Manual preview
Phaser 6120
Brand: Xerox Pages: 11
Oki T410 Safety Information Manual preview
T410
Brand: Oki Pages: 24
Savin C2410 Reference Manual preview
C2410
Brand: Savin Pages: 160
Valentin Compa II Series Operating Manual preview
Compa II Series
Brand: Valentin Pages: 110
Xerox DocuPrint 4517 User Manual preview
DocuPrint 4517
Brand: Xerox Pages: 288
NEC MultiSync 95 Support Document preview
MultiSync 95
Brand: NEC Pages: 7
Olivetti d-Copia 45 Operation Manual preview
d-Copia 45
Brand: Olivetti Pages: 246
Xerox WorkCentre 3615DN Brochure & Specs preview
WorkCentre 3615DN
Brand: Xerox Pages: 4
Minolta PagePro 8 Manual preview
PagePro 8
Brand: Minolta Pages: 227
IBM InfoPrint 1650 Configuration Manual preview
InfoPrint 1650
Brand: IBM Pages: 4
SEWOO SLK-D10 User Manual preview
SLK-D10
Brand: SEWOO Pages: 24
Xante ColourLaser 21 Series Setup Manual preview
ColourLaser 21 Series
Brand: Xante Pages: 32
Epson Stylus CX1500 Notices And Warranty preview
Stylus CX1500
Brand: Epson Pages: 24
Epson Stylus CX3200 Specifications preview
Stylus CX3200
Brand: Epson Pages: 2

Brands by name

Popular brands

Load more brands