Panasonic KX-MB2230JT, Service Manual

Page: 160 / 526

160
KX-MB2230JT/ KX-MB2270JT/ KX-MB2515JT/ KX-MB2545JT/ KX-MB2575JT/ DP-MB310JT
• The unit is cooling down the fuser unit. Wait for a while.
• The drum cartridge is reaching the end of its life. If you don’t have a new cartridge handy you should buy
one as soon as possible as your current cartridge is near the end of its useful life.
• The drum cartridge has reached the end of its useful life. Replace the drum cartridge immediately.
• When performing scan to email address, the number of scanned pages or the file size of the scanned data
has exceeded the limitation. Divide the document into sections.
• The unit has a document in memory. See the other displayed message instructions to print out the docu-
ment.
Refer to Program Mode Table (P.165).
• If the fax preview mode (feature #448) is set to “ON”,
- view, print or save the received fax documents using the web browser on the computer connected via
the LAN, and then erase the unnecessary documents.
- turn the setting to “OFF”. The fax documents stored in memory will be printed automatically.
Refer to
Program Mode Table (P.165).
• When performing scan to FTP server or scan to SMB folder, the number of scanned pages or the file size
of the scanned data has exceeded the limitation. Divide the document into sections.
• The front cover is open. Close it.
• Copying has stopped due to some existing problem (Example: a lack of recording paper or a recording
paper jam). See the other displayed message instructions to continue copying.
• The inside of the unit is extremely cold and cannot be operated. Use the unit in a warmer area.
• When performing memory transmission, the document being stored exceeded the memory capacity of the
unit. Send the entire document manually.
• When making a copy, the document being stored exceeded the memory capacity of the unit. Press [Stop]
to clear the message. Divide the document into sections.
• There is no space to store new items in the address book. Erase unnecessary items.
• There is something wrong with the unit’s modem.
• The other party’s fax machine is busy or has run out of recording paper. Try again.
• Recording paper is not loaded or the paper input tray has run out of paper. Load paper.
Note:
• "#1”: Standard input tray
• "#2”: Manual tray/multi-purpose tray
• "#3”: Lower input tray
• The recording paper is installed in the manual input tray.
• A recording paper jam occurred. Remove the jammed paper.
• Remove the protective sheet from the drum cartridge.
• The cable between the unit and the computer is not connected correctly. Check the connections.
• The computer has some kind of problem. (Example: Make sure that the computer is turned ON.)
• The Multi-Function station’s scan application is not running correctly on the computer. Restart your com-
puter and try again.
• If the PC fax setting (feature #442) is set to “ALWAYS”,
- check the connection between the computer and the unit.
- check that the computer is turned on.
• The unit is warming up. Wait for a while.
• The other party’s fax machine does not offer the polling function. Check with the other party.
DISPLAY MESSAGE CAUSE AND REMEDY