Panasonic KX-MB2100 series, Operating Instructions Manual

Page: 72 / 140

4
MCDN : Select the page layout. A M OK/SET N
5
MCDN : Select the edge you want to set the margin for. A M OK/SET N
6
Enter margin width using the dial keypad. A M OK/SET N
7
If necessary, enter the number of documents (up to 99).
8
Mx /START N
Note:
R After you finish copying, press Mw /STOP N to reset this feature.
R To automatically reduce the copies according to the set margin, see feature #474.
R This feature and page layout features cannot be used at the same time.
R You can hold the previous margin setting (feature #475).
7.2.11 Copy reservation
You can make a copy reservation under the following conditions:
– while the unit is printing documents from your computer.
– while the unit is printing received fax documents (fax supported models only). (
y )
1
Set the original.
2
While “
PC PRINTING
” or “
PRINTING
”
*1
is displayed, switch to copy mode, then press Mx /START N .
*1 Displayed only for models that support the fax feature. (
y )
3
Make necessary settings such as number of copies, resolution, zoom features and page layout features. A
Mx /START N
R “
COPY RESERVED
” will be displayed. The unit will start copying after the current printing job has finished.
72
7. Copying