Panasonic KX-MB2100 series, Operating Instructions Manual

Page: 38 / 140

3.5 Programming the unit from the operation panel
Important:
R For program availability and selection information for your unit, print the “
SETUP LIST
” (page 95).
Programs listed are available for your unit.
Programming features are as follows:
– "3.6 Programming features: Basic" (page 38)
– "5.3 Programming features: PC print" (page 56)
– "6.3 Programming features: Scan" (page 61)
– "7.3 Programming features: Copy" (page 73)
– "8.7 Programming features: Fax" (page 86)
– "9.2 Programming features: LAN" (page 90)
To change the program setting
1.
Mt /MENU N
2. Press MBN and the 3-digit code.
3. MCDN : Select the desired setting.
R This step will vary depending on the programming feature. For example, press M OK/SET N to go to the next
step.
4. M OK/SET N
5. Press Mt /MENU N to exit.
Direct command for default setting
R To change back to the default setting, press the specified number using the dial keypad in step 3 (not available
for some programs). If you want to reset all features, activate feature #159 (page 39).
3.6 Programming features: Basic
Feature Code Description
Default
key
Date and time #101 Enter the date and time using the dial keypad. –
Your logo #102 Enter your logo using the dial keypad. –
Your fax number #103 Enter your fax number using the dial keypad.
Note:
R To enter a "+", press MG /Tone N .
R To enter a space, press MBN .
R To enter a hyphen, press M R/FLASH N .
R To erase a number, press Mw /STOP N .
–
Language #110 The display and reports will be in the selected language.
FOR ENGLISH USERS:
If you want to change the language setting to English, proceed as
follows.
1. Mt /MENU N A MBNM 1 NM 1 NM 0 N
2. Press M 1 N to select English. A M OK/SET N A Mt /MENU N
–
Location #114 This setting must match your location. –
Dialling mode #120 If you cannot dial, change this setting according to your telephone line
service.
–
38
3. Basic Operations