Panasonic KX-MB2100 series Operating Instructions Manual Download Page 95

Page: 95 / 140

10.1 Reference lists and reports

You can print out the following lists and reports for your reference.

Lists/Reports

KX-MB2110
KX-MB2117

KX-MB2120
KX-MB2128

KX-MB2130
KX-MB2137
KX-MB2138

KX-MB2168
KX-MB2170
KX-MB2177
KX-MB2178

“

SETUP LIST

”

“

ADDRESS LIST

”

“

JOURNAL REPORT

”

–

“

BROADCAST LIST

”

–

“

PRINTER TEST

”

“

CALLER ID LIST

”

–

“

FTP SERVER LIST

”

–

“

SMB FOLDER LIST

”

–

“

WLAN STATUS LIST

”

–

“

DEPT.PRINT COUNT

”

“

QUICK-JOB LIST

”

*1 Only for models that support the Caller ID feature. (

)

/MENU

(repeatedly):

“

PRINT REPORT

”

MFEN

: Display the desired item.

Press

OK/SET

to start printing.

/MENU

To check the Caller ID list through the web browser interface (LAN and Caller ID supported models only)
(

)

Important:

Make sure the Caller ID list on web is set to “

ENABLED

” beforehand (feature #568).

Start Multi-Function Station.

2. [Device]

[Configuration Web Page]

[Device]

Type “

root

” as the user name, then enter the programming password (feature #155).

[OK]

Select

[FAX FEATURE]

from the menu.

Click

[List]

next to

[CALLER ID]

The Caller ID list will be displayed.

Close the web browser.

To check the journal report through the web browser interface (LAN and fax supported models only) (

)

Important:

Make sure the journal on web is set to “

ENABLED

” beforehand (feature #569).

Start Multi-Function Station.

2. [Device]

[Configuration Web Page]

[Device]

Type “

root

” as the user name, then enter the programming password (feature #155).

[OK]

Select

[FAX FEATURE]

from the menu.

Click

[List]

next to

[JOURNAL]

The journal report will be displayed.

Close the web browser.

10. . Other Useful Features

10. Other Useful Features

Summary of Contents for KX-MB2100 series













































































































































Search results

Summary of Contents for KX-MB2100 series

Reviews:

Related manuals for KX-MB2100 series

Brands by name

Popular brands

Panasonic KX-MB2100 series, Operating Instructions Manual

Search results

Summary of Contents for KX-MB2100 series

Reviews:

Related manuals for KX-MB2100 series

Brands by name

Popular brands