Panasonic KX-MB1500, Operating Instructions Manual

Page: 34 / 80

6.1 Sending a fax manually
M
Set
NMCNMDN
M
Start
N
M
Redial
N
M
Quality
N
M
Fax
N
M
SP-Phone
N
1
If the M Fax N light is OFF, turn it ON by pressing
M Fax N repeatedly.
2
Set the original (page 18).
3
If necessary, change the resolution and contrast
according to the type of document.
R To select the contrast, see page 34.
R To select the resolution, see page 34.
4
Dial the fax number.
5
Press M Start N to scan the document into memory.
Wait until “
SCAN:PRESS SET
” “
SEND:PRESS
START
” is displayed.
6
To send a single page:
Press M Start N .
To send multiple pages:
1.
Place the next page on the scanner glass. A
M Set N
R To send more pages, repeat this step.
2. When all pages are scanned, press M Start N .
Note:
R To stop sending, see page 58.
R While talking to the other party using the
M SP-Phone N , you can send a fax using the scanner
glass by pressing M Start N , and then M 1 N (To receive
a fax, press M 2 N ).
R You can change the default operation mode (feature
#463 on page 49) and the timer before returning to
the default operation mode (feature #464 on
page 49).
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
1. Press M Quality N repeatedly to display “
CONTRAST
” .
2. Press MCN or MDN to change the contrast.
3. M Set N
Note:
R You can save the previous contrast setting (feature
#462 on page 49).
To select the resolution
1.
Press M Quality N repeatedly to display
“
RESOLUTION
” .
2. Press MCN or MDN to change the resolution.
– “
STANDARD
” : For normal-sized characters.
– “
FINE
” : For small-sized characters.
– “
SUPER FINE
” : For very small-sized characters.
– “
PHOTO
” : For photographs, shaded drawings,
etc.
3. M Set N
R Using the “
FINE
” , “
SUPER FINE
” and “
PHOTO
”
settings will increase transmission time.
To redial the last number
M Redial N
R If the line is busy, the unit will automatically redial the
number 1 time.
Note:
R To stop sending, see page 58.
Reserving the fax transmission (Dual Access)
You can reserve a fax transmission even when the unit
is just receiving a fax or sending a fax from memory.
– Up to 3 reservations when sending
– Up to 4 reservations when receiving
1. Set the original during fax reception or fax memory
transmission.
2. Enter the fax number using the dial keypad or
phonebook.
3. M Start N
R The unit will scan 1 page. Place the next
document on the scanner glass and press
M Set N .
Repeat this until all the documents are scanned,
then press
M Start N .
R If the document exceeds the memory capacity, the
reservation for that document will be canceled. You
must send the entire document manually.
Printing a confirmation report
A confirmation report provides you with a printed record
of transmission results. To print the confirmation reports,
make sure that feature #401 is activated (page 50). For
an explanation of the messages, see page 59.
34
6. . Fax (KX-MB1520 only)
6. Fax (KX-MB1520 only)