Panasonic KX-HTS824, Feature Manual

Page: 24 / 80

Conditions Note
It is possible to modify (remove/add) the common incoming call
destinations received by each SIP carrier. Example:
•
Remove Digit: 6
•
Additional Dial: 10
Received number:
876543 21
↓
Modified number:
10 21
(Remove the first 6 digits, and
add "10" as the first digits.)
A maximum of 200 DDI numbers can be programmed in the system.
If a modified incoming call number does not match the DDI/DID
table, it will be routed to the corresponding extension if it matches
the extension number. The floating extension number is
also targeted.
If a modified incoming call number does not match the extension/
floating extension number, and the DIL settings are programmed,
DIL will operate. The call will be disconnected when DIL settings are
not programmed. Refer to 3.1.3 Direct In Line (DIL)
PIL Reference
2.4.3 PBX Configuration—[3-3] Trunk—DDI
3.1.3 Direct In Line (DIL)
Description
Provides automatic direction of an incoming trunk call to a preprogrammed destination without DID/DDI
number. Each Trunk line has a destination for each time mode (day/lunch/night).
For other incoming trunk call distribution methods, the priority of methods is as follows:
1.
CLI Destination
2.
DID/DDI
3.
DIL
Important
FWD No Answer Time is used as the timer for forced call disconnection. For more information, refer to
3.1.9 Call Forwarding (FWD).
Conditions Note
The call will be disconnected when an invalid destination number is
set.
PIL Reference
2.4.2 PBX Configuration—[3-2] Trunk—DIL
3.1.3 Direct In Line (DIL)
24 Feature Manual