4
Installation
Install the siren in the desired
location.
Registering the siren
This procedure is not required for
devices that were included as part of
a bundle.
Before you can use the siren, it must
be registered to the hub.
If you purchased devices separately
(i.e., not as part of a bundle), you must
register each device to the hub.
You can register each device by using
the registration buttons or the
[Home
Network]
app.
Note:
R
Before registering the siren, make
sure the AC adaptors of the hub and
siren are connected and each
device is powered.
Using registration buttons
1
Hub:
Press and hold
M
OTHER
DEVICE
N
until the LED indicator
blinks in green.
2
Siren:
Press and hold
M
N
until the
LED indicator blinks in green
(page 7).
R
When registration is complete,
the hub sounds one long beep.
Note:
R
To cancel without registering the
siren, press
M
N
on the hub and
on the siren again.
R
If registration fails, the hub sounds
several short beeps.
Using the app
When you register the siren by using
the
[Home Network]
app, you can
assign a name to your devices and
group them by location. For more
information, refer to the User’s Guide
(page 12).
8
For assistance, visit www.panasonic.ca/english/support
Setup
HNS105C_(en-en)_0224_ver.020.pdf 8
2015/02/24 15:12:14
