Testing the siren
After you have installed the
[Home
Network]
app on your mobile device,
you can use your mobile device to test
the siren. For more information, refer to
the User’s Guide (page 12).
1
Start the
[Home Network]
app,
and tap
[Settings]
.
2
Tap
[Device Profiles]
.
3
Tap
[Siren]
and then select the
desired siren.
4
Tap
[Installation Test]
.
5
Tap
[Play]
.
Adjusting the siren’s
volume
You can adjust the siren’s volume
using the siren’s
M
HIGH
N
/
M
LOW
N
switch
(page 7).
Features available
when using the
[Home Network] app
Some of the siren’s features that are
available when using the
[Home
Network]
app are listed below. For
more information, refer to the User’s
Guide (page 12).
–
Alarm system
You can use the app to arm and
disarm the alarm system, confirm
the current status of the system’s
devices, and view a log of previous
events. You can also use the app to
stop the siren from sounding.
–
Device management
You can use the app to confirm the
wireless signal strength of the siren,
change the siren’s name, change
whether the siren sounds, flashes,
or both, and test the siren.
Accessing the User’s
Guide
The User’s Guide is a collection of
online documentation that helps you
get the most out of the
[Home
Network]
app.
1
iPhone/iPad
Tap
in the app’s home screen.
Android™ devices
Tap or press your mobile
device’s menu button in the app’s
home screen.
2
Tap
[User’s Guide]
.
Note:
R
Microsoft
®
Windows
®
Internet
Explorer
®
8 and earlier versions are
not supported.
R
Android 4.1 or later versions are
recommended.
R
You can also access the User’s
Guide at the web page listed below.
www.panasonic.net/pcc/support/tel/
homenetwork/manual/
12
For assistance, visit www.panasonic.ca/english/support
Appendix
HNS105C_(en-en)_0224_ver.020.pdf 12
2015/02/24 15:12:14
