Removing from the wall
n
Removing from the wall mounting adaptors
1
Insert a flat screwdriver into the notches on the wall mounting adaptors, and
carefully pry away the main unit and probe unit.
2
Remove the screws that secure the wall mounting adaptors to the wall.
n
Removing when secured with double-sided tape only
1
Tie a piece of thread to two sticks, screwdrivers, etc.
2
Pull the thread tight and use it to cut the double-sided tape, and then remove
any excess tape.
1
Excess tape
1
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
19
Setup
HNS103EX_(en_en)_0111_ver.105.pdf 19
2017/01/11 18:37:55
