3
Insert the anchor into the hole so that it is flush with the wall surface.
4
Line up the holes on the mounting bracket with the anchors, then insert and
tighten each screw.
R
Use the supplied screws (
2
).
R
Place the bracket with the
“UP”
mark facing upwards.
2
2
Installing the keypad to the mounting bracket
Attach the keypad to the bracket.
R
Insert the grooves on the keypad to the 4 tabs on the bracket, and then push
down the keypad.
For assistance, visit www.panasonic.ca/english/support
13
Setup
HNK101C_(en_en)_0804_ver.030.pdf 13
2015/08/04 21:00:14
