1
M
N#132
2
Enter the current 4-digit hub PIN (default:
“
0000
”
).
3
Enter the new 4-digit hub PIN.
a
M
OK
N
4
MbN
:
“
Yes
”
a
M
OK
N
a
MeN
Changing the unit’s region
setting/Resetting the hub
1
M
N#136
2
MbN
: Select the desired region.
a
M
OK
N
“
Other
”
= countries except Czech,
Hungary, Poland, and Slovakia
“
Česká rep.
”
= Czech
“
Slovensko
”
= Slovakia
“
Polska
”
= Poland
“
Magyarorsz
”
= Hungary
3
MbN
:
“
Yes
”
a
M
OK
N
a
MeN
Note:
R
Changing the unit’s region setting may
cause the settings for your region or your
customised settings to return to their default
settings.
R
When you select
“
Other
”
in step 2, the
answering system announcement language
changes to English.
Registering a handset to the hub
If for some reason the handset is not
registered to the hub (for example,
is
displayed even when the handset is near the
hub), re-register the handset.
1
Handset:
M
N#130
2
Hub:
Press and hold
M
A HANDSET/
LOCATOR
N
until the LED indicator blinks
slowly in green.
R
If all registered handsets start ringing,
press
M
A HANDSET/LOCATOR
N
again to stop, then repeat this step.
3
Handset:
M
OK
N
a
Wait until
“
Hub PIN
”
is
displayed.
a
Enter the hub PIN (default:
“
0000
”
).
a
M
OK
N
R
If you forget hub PIN, contact an
authorised service centre.
Deregistering a handset
A handset can cancel its own registration to
the hub, or other handsets registered to the
same hub. This allows the handset to end its
wireless connection with the system.
1
M
N#131
R
All handsets registered to the hub are
displayed. If mobile devices
(smartphones, tablets, etc.) are
registered to the hub, you can also
select and deregister them using this
procedure.
2
MbN
: Select the handset you want to
cancel.
a
M
OK
N
3
MbN
:
“
Yes
”
a
M
OK
N
a
MeN
Wi-Fi
®
settings
You can use the Home Network app to access
the system from your mobile device
(smartphone, tablet, etc.). The app offers a
variety of features that you can enjoy even
when away from home. For more information
about the app, see page 41.
In order to access the system from your
mobile device, you must first configure the hub
to connect to your wireless router.
Note:
R
Make sure your wireless router is turned on
and functioning.
R
Make sure that you know your wireless
router’s Wi-Fi settings, including its SSID
(wireless network name), security
password, etc. In some situations, you may
also need to know the IP-related settings
required in order for the hub to connect to
your wireless router, including your wireless
router’s IP address, subnet mask, etc.
R
Make sure you have the operating
instructions included with your wireless
router handy.
R
The hub cannot find your wireless router if
the wireless router does not broadcast its
SSID. If there is a “stealth mode” setting,
31
Programming
Summary of Contents for KX-HNH100FX
Page 54: ...54 Notes ...
Page 55: ...55 Notes ...
